FIBER RACEWAY

Fiber Raceway is designed to support and provide perfect routes for fibre network cabling. It is designed as a tool less construction for ease of installation. Fiber Raceway is robust, yet flexible with a number of components to complement the most demanding designs for significant amounts of network fiber connectivity. A range of sizes are available to meet all needs and designs, the bright yellow colour structure makes it easy to identify routes within the most complex of environments.

FIBER RACEWAY TRAPEZE HANGER KIT

Supports fiber raceway from the ceiling or from the C channel bar.

STRAIGHT FIBER RACEWAY

Used to carry the cables horizontally throughout the system. Accepts cover and fittings

“45° DOWN ELBOW FIBER RACEWAY

Attaches to 4’’x15’’, 4’’x10’’, 4’’x5’’, or 2.36’’x2.36’’ channel and/or fitting to create a 45° downward angle from a straight horizontal run.

VERTICAL CUTTING IN TEE FIBER RACEWAY

Attaches to 4’’x10’’ or 4’’x5’’ channel to create a 90° horizontal elbow from anywhere on a straight horizontal run.

FIBRE RACEWAY COUPLER

Quickly joins two sections of channel and/or fittings. Tighten and release bolts by fingers, absolutely toolless.

CROSS FITTING FIBER RACEWAY

Attaches to 4’’x15’’, 4’’x10’’, 4’’x5’’, or 2.36’’x2.36’’ channel and/or fittings to create a horizontal four way cross intersection with two 4’’x15’’, 4’’x10’’, 4’’x5’’, or 2.36”x2.36” exits, respectively.

HORIZONTAL ELBOW FIBER RACEWAY

Attaches to 4’’x15’’, 4’’x10’’, 4’’x5’’, or 2.36’’x2.36’’ channel and/or fittings to create a 90° horizontal elbow from a straight horizontal run

45° UP ELBOW FIBER RACEWAY

Attaches to 4”x15”, 4”x10”, 4”x5”, or 2.36”x2.36” channel and/or fitting to create a 45° upward angle from a straight horizontal run. Used with 45° Down Elbow.

HORIZONTAL TEE FIBER RACEWAY

Attaches to 4’’x15’’, 4’’x10’’, 4’’x5’’, or 2.36’’x2.36’’ channel and/or fittings to create a 90° horizontal branch from a straight horizontal run.

FIBER RACEWAY ADAPTOR

Attaches any 4’’x15’’, fitting or channel to any 4’’x10’’ fitting or channel, or any 4’’x10’’ to any 4’’x5’’ fitting or channel.

DOWNSPOUT KIT FIBER RACEWAY

Assembles onto 4”x5”, 4”x10”, or 4”x15” channel, spilling over the side into a 90mm or 130mm movable exit with or without corrugated pipe.

END CAP FIBER RACEWAY

Used for closing off open ends of the channel or fittings.

FIBRE RACEWAY CABINET TOP SUPPORT KIT (FIXED & ADJUSTABLE)

Used to carry the cables horizontally throughout the system. Accepts cover and fittings.

FIBER RACEWAY LADDER RACK SIDE SUPPORT KIT

Used to support the 4’’x5’’ or 4’’x10’’ system by spanning two existing threaded rod drops. Can be installed from above or below.
Varan finns på lager.
Varan är beställd från leverantör och leveransdatumet är bekräftat.
Obekräftat - Kontakta kundcentret på post@amentio.se för förväntat leveransdatum.
Varan måste beställas från leverantör.
Varan befinner sig på fjärrlager
Varan är beställd från leverantör, men leveransdatum är inte bekräftat.
Varorna beställs från vår leverantörs lager.
Obekräftat - Kontakta kundcentret för närmare information.